Displaying 1 to 32 (of 32 products) Result Pages:  1 
 2/3 Inch Jaw Puller 2 Ton 
 

2/3 Inch Jaw Puller 2 TonItem 25901: OEM 2 and 3 Jaw 2-Ton Gear Puller Jaw grip tightens as pressure is applied Reversible Maximum Reach 3 1/2" Maximum Spread 4 3/4" Center Forcing Screw 3/8" to 24 x 4 7/8"

  2/3 Jaw Kit 3 Inch 
 

2/3 Jaw Kit 3 InchItem 25902: OEM 3" 2/3 Jaw Adjustable/Reversible Gear Puller. High Alloy Steel Can be used in a two or three jaw configuration Puller jaws can be adjusted or reversed

  2/3 Jaw Kit 4 Inch 
 

2/3 Jaw Kit 4 InchItem 25903: OEM 4" 2/3 Jaw Adjustable/Reversible Gear Puller. Hi Alloy Steel Can Be Used In A Two Or Three Jaw Configuration Puller Jaws Can Be Adjusted Or Reversed

  3 Jaw Puller 2-Ton 
 

3 Jaw Puller 2-TonItem 27011: OEM 2 and 3 Jaw Reversible 2 Ton Gear Puller Heat treated alloy steel Quick change coupler Maximum reach 3 1/2" Maximum speed 4 3/4" Center forcing screw 3/8" - 24 x 4 7/8"
 3-Jaw 2 Ton Puller Loaner 
 

3-Jaw 2 Ton Puller LoanerItem 27107: OEM Posi Lock(TM) 3" Miniature 3 Jaw 2 Ton Gear and Bearing Puller The Posi-Lock(TM) puller features a patented safetly control cage to secure the position of the jaws while providing maximum protection for the mechanic. Jaws can clamp onto a rounded surface or pull from a groove, eliminating the need for accessories.

  4 Wheel Drive Spindle Puller Assortment 
 

4 Wheel Drive Spindle Puller AssortmentItem 27104: OEM 4 Wheel Drive Spindle Puller Attachment For use with OEM Slide Hammer # 27033 and others with 5/8" x 18 thread. May also be used with 1/2" x 20 slide hammers. This tool is three step threaded to fit most front spindles: 1 1/2", 1 5/8", and 2" on four wheel drive vehicles.

  Bearing Puller 
 

Bearing PullerItem 27085: OEM Slide Hammer Bearing Puller Set Set consists of OEM part #'s 27033 and 27059 in a molded carrying case

  Blind Hole Puller Set 
 

Blind Hole Puller SetItem 27128: OEM Blind Hole Puller Set This special puller is designed to pull blind hole bearings, bushings, and sleeves with inside diameters. Instructions included. Range 3/8" to 1 1 /8".
 Chrysler Harmonic Dampener Puller 
 

Chrysler Harmonic Dampener PullerItem 27139: OEM Chrysler Harmonic Puller Used to remove the harmonic damper on most Chrysler/Mitsubishi engines. Its compact, low profile design aliminates the need to pull the radiator prior to removing the pulley in most cases. Instructions included.

  Flange Type Axle Puller Attachment 
 

Flange Type Axle Puller AttachmentItem 27032: Flange Type Axle Puller Attachment Attachment designed to be used with OEM Slide Hammer # 27033 or any similarly threaded 5/8" x 18. Pulls the axle on most cars and light trucks with flange type axles. The bolt circle range is from 4 1/2" to 5 1/2" and the slots in the yoke permit use on axles with 4, 5, and 6 studs.

  Gear Puller Long 2/3 Inch Jaw 
 

Gear Puller Long 2/3 Inch JawItem 25919: 2 and 3 Jaw 5 Ton Puller Jaw grip tightens as pressure is applied Reversible Maximum reach 5 1/2" Maximum spread 7"

  Harmonic Balancer 
 

Harmonic BalancerItem 25053: OEM Heavy Duty Harmonic Balancer Puller Set. Removes balancers, steering wheels, pulleys, and gears with tapped holes 4 slots in yolk for 2 or 3 hole applications Includes: 3/8" x 24", 5/16" x 18", 3/8" x 16", M8 - 1.25 x 80mm
 Harmonic Balancer Installer 
 

Harmonic Balancer InstallerItem 27144: Harmonic Balancer Installer Used to properly install harmonic balancers without damage. Instructions included. Comes in a sturdy molded plastic case.

  Harmonic Balancer Puller 
 

Harmonic Balancer PullerItem 25426: OEM Harmonic Balancer Puller For pulling balancers, vibration dampeners, pulleys and gears with tapped holes. Four yoke slots allow for use in two or three hole applications. Floating swivel prevents damage to the shaft ends. Yoke is forged from alloy steel. Set includes yoke. pressure screw and pulling screws.

  Harmonic Balancer Puller Set 
 

Harmonic Balancer Puller SetItem 27019: Harmonic Balancer Puller Set For pulling balancers, vibration dampers, pulleys, and gears with tapped holes. Four yoke slots allow unit to be used for two or three hole applications Floating swivel prevents damage to the shaft ends Yoke is heat treated alloy steel for strength and durability Set includes yoke, pressure screw, and pulling screws in a molded storage case

  OEM 5LB Slide Hammer 
 

OEM 5LB Slide HammerItem 27033: OEM 5 lb Slide Hammer Threaded 5/8" x 18 Works with OEM attachments as well as other mfrs attachments with the same thread. Comes in a sturdy molded case with room to store other attachments.
 OEM Front Wheel Drive Axle Pulley Attachment 
 

OEM Front Wheel Drive Axle Pulley AttachmentItem 27058: OEM Front Wheel Drive Axle Pulley Attachment Use with OEM Slide Hammer 27033 or any manufacturer's slide hammer with 5/8" x 18 threads. Designed to pull inner CV joints with hidden retaining rings from front wheel drive vehicles without damaging joints.

  OEM Front Wheel Drive Hub Puller 
 

OEM Front Wheel Drive Hub PullerItem 27037: OEM Front Wheel Drive Hub Puller Use with OEM Slide Hammer 27033 Fits most domestic and import vehicles with independant front wheel suspension Yoke and bolt are threaded 5/8" x 18

  OEM Pitman Tie Rod Arm Puller 
 

OEM Pitman Tie Rod Arm PullerItem 27022: OEM Pitman/Tie Rod Arm Puller A smaller design than OEM # 27016 for use on compact cars and smaller Pitman arms Yoke is forged and heat treated with a 2 1/16" opening

  OEM Steering Wheel Lock Plate Remover 
 

OEM Steering Wheel Lock Plate RemoverItem 27044: OEM Steering Wheel Lock Plate Remover Simplifies the removal and installation of the lock plate snap rings when servicing steering wheel columns. The extended yoke services both tilt-wheel and telescoping columns. The adapter is reversible with 9/16" x 18 threads on one side and 14mm x 1.5 on the other.
 Pilot Bearing Puller Attachment 
 

Pilot Bearing Puller AttachmentItem 27059: OEM Pilot Bearing Puller Attachment Use with OEM Slide Hammer 27033 or any manufacturer's slide hammer with 5/8" x 18 threads. Puller inserts behind bearing to allow it to be safely hammered out with the slide hammer. It will also pull the bearings and bushings on starters and generators.

  Pitman Arm Puller Box 
 

Pitman Arm Puller BoxItem 27016: OEM Pitman Arm Puller Used for pulling Pitman Arms. Instructions included.

  Puller 2-jaw 5 Ton 
 

Puller 2-jaw 5 TonItem 25914: OEM 2 Jaw 5 Ton Gear Puller Jaw grip tightens as pressure is applied Reversible Maximum reach 3 1/4" Maximum spread 6"

  Pulley Puller 
 

Pulley PullerItem 25190: OEM Pulley Puller Removes pressed-on one or two groove pulleys from alternators and power steering pumps Fits both large and small pulleys found in most domestic and imported passenger cars Features rigid drop-forged jaws, a solid block body, and fine thread screws for easy pulling
 Pulley Puller Installer Kit 
 

Pulley Puller Installer Kit25298: OEM Pulley Puller/Installer Kit Fits pulleys with hub diameters measuring 1 1/8", 1 1/4", 1 5/16", and 1 3/8" Includes two screws for use on most Ford, Chrysler GM, and VW power steering pulleys with Saginaw, Thompson, and Ford C111 and C2 pumps. Also pulls pulleys on GM belt driven vacuum pumps, and the pressed on water pump pulleys of GM V6 engines.

  Pulley Puller/Installer Kit 
 

Pulley Puller/Installer Kit27031: OEM Pulley Puller/Installer Kit Fits pulleys with hub diameters measuring 1 1/8", 1 1/4", 1 5/16", and 1 3/8" Includes two screws for use on most Ford, Chrysler GM, and VW power steering pulleys with Saginaw, Thompson, and Ford C111 and C2 pumps. Also pulls pulleys on GM belt driven vacuum pumps, and the pressed on water pump pulleys of GM V6 engines. Includes molded storage carrying case

  Steer Wheel Lock Remover 
 

Steer Wheel Lock RemoverItem 25134: Steering Wheel Lock Plate Remover For easy removal and installation of lockplate snap rings when servicing steering wheel columns. The extended yoke services both tilt-wheel and telescoping columns.

  Steering Wheel Puller 
 

Steering Wheel PullerItem 25200: OEM Steering Wheel Puller Set For use on all major makes of automobile. This set includes yoke, pressure screw and three sets of pulling screws with washers and swivel. Comes in a convenient storage case. Sizes include 5/16" x 18.5, 5/16" x 24, and 3/8" x 16
 Steering Wheel Puller Set 
 

Steering Wheel Puller SetItem 27017: OEM Steering Wheel Puller Set Includes: Yoke Pressure screw 3 sets of pulling screws with washers and swivel Sizes: 5/16" x 18, 5/16" x 24, 3/8" x 16

  Tie Rod Puller 
 

Tie Rod PullerItem 25297: OEM Tie Rod Puller 2 1/16" yoke opening Yoke is drop forged construction and heat treated for strength and durability. For use on compact cars and smaller Pitman arms. Also useful for removing tie rods on most cars and light trucks.

  Timing Gear And Pulley Set 
 

Timing Gear And Pulley SetItem 27009: OEM Timing Gear and Pulley Set For servicing crankshaft gears and pulleys as well as timing gears on a wide range of gasoline and diesel powered engines. 5" Long Yoke Two 6" long 5/16" x 18" Bolts Molded storage case

  Timing Gear Puller 
 

Timing Gear PullerItem 25258: OEM Timing Gear and Pulley Puller 5" Yoke length Includes two 6" long 5/16 x 18 bolts Convenient molded storage/carry case For servicing crankshaft gears, pulleys, timing gears on a wide range of gasoline and diesel powered engines.
Displaying 1 to 32 (of 32 products) Result Pages:  1